Panasonic KX-DT521 - Wall Mounting - Fastening and Cable Routing; Securing Wall Mounting Adaptor; Cable Routing Through Adaptor; Wall Screw Spacing and Mounting

2 F
asten the wall mounting adaptor(s) to the base with the screw(s).
(Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m
[6.12 kgf·cm/5.31 lbf·in])
3 Connect the cables to the unit, and run the cables through the wall
mounting adaptor, as shown in the illustration below.
4 Drive the screws into the wall either 83 mm (3
1
/4 in) or
100 mm (3
15
/16 in) apart, and mount the unit on the wall.
Example: KX-DT543/KX-DT546 with KX-DT590
4
Washer
Drive the screw
to this point.
2
3
The telephone line cord
or less
40 mm (1
37
/
64
in)
222
mm
(8
47
/
64
in
)
83 mm
(3
1
/
4
in)
100 mm
(3
15
/
16
in)
22
Wall Mounting