Panasonic KX-DT521 - Detailed Control Descriptions (Page 8); Handset Hook to Navigator Key; Enter and Soft Buttons

D Handset Hook:
Keeps the handset stable when the unit is
mounted on a wall.
E Headset Jack
F PAUSE/PROGRAM
(KX-DT521 only): Used to insert a pause
when storing a telephone number. This button is also used for
programming this unit.
PAUSE (KX-DT543/KX-DT546 only): Used to insert a pause
when storing a telephone number.
G CONF:
Used to establish a multiple party conversation.
H MESSAGE:
Used to leave a message waiting indication or call
back the party who left the message waiting indication.
I FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up.
J REDIAL:
Used to redial the last dialed number.
K AUTO ANS/MUTE: U
sed to receive an incoming call in
hands-free mode or mute the microphone/handset during a
conversation.
L TRANSFER:
Used to transfer a call to another party.
M AUTO DIAL/STORE:
Used for System/Personal Speed Dialing
or storing programme changes.
N HOLD:
Used to place a call on hold.
O INTERCOM: U
sed to make or receive intercom calls.
P SP-PHONE (Speakerphone):
Used for performing hands-free
operations.
Q Microphone:
Used for hands free conversations.
R Navigator Key:
Used to adjust the volume and the display
contrast or select desired items.
S
ENTER
*
1
: Used to assign the selected item.
T
Soft Buttons (S1-S4)
*1
: S1-S4 (located from left to right) are
used to select the item displayed on the bottom line of the
display.
8
Location of Controls