Check the soldering.
Resolder or replace parts as needed.
Related parts: C400,C559,IC401,IC410,L222
NO
Confirm the voltage at Pin 8 of IC401 (VCC33) and
Pin 106 of IC410.
Are they about 3.3V?
Related parts: IC410,R408
NO
YES
Confirm the frequency of clock signal at Pin 6 of
IC401. Is it 103.68MHz?
(This clock is NOT continuous)
Refer to the waveform (2).
YES
Related parts: IC410,IC401,R404,R405,R406,
R407,R408,R409,C400,C559
NO
YES
Confirm the waveform of communication
between IC401 and IC410.
Refer to the waveform (3).