Panasonic KX-F580 - Changing the logo print position; Changing the display contrast

42
Changing the display contrast
Use this feature to adjust the brightness of the display.
NORMAL: (Pre-selected setting)
DARKER: Used when the display contrast is too light.
2 3
4 5 6
7 8 9
0
1
1
Press .
MENU
2
Press , then .
3 9
3
Press .
START/COPY/SET
4
Press or to select the desired setting.
5
Press .
START/COPY/SET
6
Press .
MENU
SYSTEM SET UP
LCD CONTRAST
MODE=NORMAL
Dial keypad
START/COPY/SET
MENU
Changing the logo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document’s paper size (pre-selected setting).
IN: Inside of the transmitted document’s paper size.
1
Press .
MENU
2
Press , then .
2 1
3
Press .
START/COPY/SET
4
Press or to select the desired setting.
5
Press .
START/COPY/SET
6
Press .
MENU
SYSTEM SET UP
LOGO POSITION
MODE=OUT
2 3
4 5 6
7 8 9
0
1
Dial keypad
START/COPY/SET
MENU