43
This unit work without the handset and handset cradle. When you do not use the handset and cradle, set this
feature to NO HANDSET.
USE HANDSET: Choose when you use the handset and handset cradle (pre-selected setting).
NO HANDSET: Choose when you do not use the handset and handset cradle.
Setting the handset switch
4
Press or to select the desired setting.
5
Press .
Dial keypad
The friendly reception feature allows you to receive fax documents automatically without pressing
. See page 20 for further details.
Setting the friendly reception
1
Press .
4
Press or to select the desired setting.
5
Press .
If you set this feature to OFF, you will have to press to receive fax documents each time
you answer a call.
Note:
After setting NO HANDSET, disconnect
and connect the power cord again.
Dial keypad
Advanced
Operations