Panasonic KX-F780 - Report Printing Settings; Transmission Report and Journal Auto Print Settings

63
Advanced
Operations
2 3
4 5 6
7 8 9
0
1
2 3
4 5 6
7 8 9
0
1
Setting the transmission report printing
One of the following choices is available.
ERROR: The transmission report will print out only when fax transmission fails (pre-selected setting).
ON: The report will always print out, indicating whether fax transmission is successful or not.
OFF: The report will not print.
1
Press (MENU).
2
Press K, then @ D.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select the desired setting.
5
Press (START/COPY/SET).
6
Press (MENU).
MODE=ERROR [ÿŸ]
TX-REPORT MODE
SYSTEM SET UP
Setting journal auto print
This unit will automatically print a journal report after every 35 fax communications. After printing, the journal
memory will be erased and only subsequent activity will be recorded.
When this feature is deactivated, the unit will store the records of the last 35 fax communications, but the unit
will not print the journal report automatically.
1
Press (MENU).
2
Press K, then B B.
3
Press (START/COPY/SET).
4
Press (‹) or (›) to select the desired setting.
5
Press (START/COPY/SET).
6
Press (MENU).
MODE=ON [ÿŸ]
AUTO JOURNAL
SYSTEM SET UP
(MENU)
Dial keypad
(START/COPY/SET)(‹)
(›)
(MENU)
Dial keypad
(START/COPY/SET)(‹) (›)