2.3.3. TROUBLESHOOTING ITEMS TABLE
ITEM SYMPTOM REFERENCE
ADF
(Auto Document Feeder)
The document does not feed.
Document jam
Multiple feed
Skew
See
ADF (Auto Document Feed) SECTION
(P.33)
Recording paper feed The recording paper does not feed.
Paper jam
Multiple feed and skew
See
ADF (Auto Document Feed) SECTION
(P.33)
Printing The sent fax data is skewed.
The received fax data is skewed.
The received or copied data is expanded.
A blank page is received.
Black or white vertical line
Black or white lateral line
An abnormal image is printed
See
ADF (Auto Document Feed) SECTION
(P.33)
Communication
FAX, TEL
(analog board)
Cannot communicate by fax.
An error code is displayed.
See
COMMUNICATION SECTION
(P.46)
Cannot talk.
The DTMF tone doesn’t work.
The handset / monitor doesn’t work, etc.
See
ANALOG BOARD SECTION
(P.76)
Operation panel Keys are not accepted. See
OPERATION PANEL SECTION
(P.82)
Sensor If the electric circuit is the cause, the error
message corresponding to the sensor will be
displayed.
See
SENSOR SECTION
(P.83)
2.3.3.1. SIMPLE CHECK LIST
SERIAL NO. DATE
FUNCTION JUDGEMENT REFERENCE
FAX operation Transmission OK / NG
Receiving OK / NG
Copy operation OK / NG
Telephone operation Handset transceiver / receiver OK / NG
MONITOR sound OK / NG
Ringer sound OK / NG
Dial operation OK / NG
Volume operation OK / NG
VOX detection OK / NG Service code #815 (Refer to
TEST
FUNCTIONS
(P.99))
Operation Panel Key check OK / NG Service code #561 (Refer to
TEST
FUNCTIONS
(P.99))
LED check OK / NG Service code #557 (Refer to
TEST
FUNCTIONS
(P.99))
LCD check OK / NG Service code #558 (Refer to
TEST
FUNCTIONS
(P.99))
Sensor Sensor check OK / NG Service code #815 (Refer to
TEST
FUNCTIONS
(P.99))
Clock Display changing OK / NG Is the time kept correctly?
Check with another clock.
EXT-TAM Handset transceiver / receiver OK / NG
Remote control OK / NG
32
KX-FHD301
To Next Page
Loading...
