10
KX-FHD331/KX-FHD332
7
KX-FHD331/KX-FHD332
1.2. REPLACEMENT PARTS LIST
1.2.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LISTS.
1. Improve performance Remarks:
*a: Change of company name.
*b: To share the parts with other models.
*c: To enhance the quality
For RoHS-compliant parts marked by *R
*1 Use only RoHS parts for the production sets which serial No. labels are after 5DXXXXXXXXX.
*2 Either original or RoHS parts can be used for the production sets which serial No. labels are
before 5CXXXXXXXXX.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
1.2.2. ORIGINAL AND NEW PARTS COMPARISON LISTS
Change of the Suffix Code KX-FHD331 only
Suffix Code Reasons of change
A→B 1. To upgrade the ROM version. (Program No. is changed from E981AD to E981AE.)
2. The Digital Board Unit etc. (Refer to NEW DIGITAL BOARD.)
Serial No.Label tells you the suffix code as follows.
3
KX-FHD331 / KX-FHD332
To Next Page
Loading...
