31
KX-FHD331/KX-FHD332
28
KX-FHD331/KX-FHD332
1 REPLACEMENT PARTS LIST
1.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
1. Improve performance Remarks:
*a: To improve the quality.
*b: To improve the Lock part of operation panel cover.
*c: To facilitate the production process.
*d: To improve the performance of Paper Top Sensor.
*e: To increase the safety margin.
*f: To change the ROM version for improvement of the noise during Caller-IQ download.
(KX-FHD331: E981AB→E981AC), (KX-FHD332: E991AA→E991AB)
*g: To improve paper handling of recording paper on exit.
*h: To improve the weather-resistance.
*i: Change of company name.
*j: As a result of transferring the production factory from China to Malaysia.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
**The following items (V-Z) indicate the interchangeability. See the “Notes” column for each part in ORIGINAL AND NEW PARTS
COMPARISON LIST .
Parts Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Note:
Alphabets in the “Remarks” column in the following lists correspond to the alphabets in the “Remarks”inREFERENCE
CHART.
1.2. ORIGINAL AND NEW PARTS COMPARISON LIST
Ref No. Part No. Part Name & Descriptions Pcs/Set Remarks Notes Suffix
Original (Old) New
CABINET AND ELECTRICAL PARTS
4 PFHX1495Z PFHX1616Z PLASTIC PARTS, RING COPY 1 *a 1 W
5 PFHX1497Z PFHX1618Z PLASTIC PARTS, RING STOP 1 *a 1 W
6 PFHX1496Z PFHX1617Z PLASTIC PARTS, RING START 1 *a 1 W
13 PFUV1054Y PFUV1054X COVER, OPERATION PANEL (Change 1) 1 *b 1 X
13 PFUV1054X PFUV1054W COVER, OPERATION PANEL (Change 2) 1 *c 1 V
18 PFHX1607Z ------------- SPACER, HEAD SHEET 0 Delete 6 ---
49 PFDF1086Z ------------- SHAFT, ANTI CURL *1 0 *g 6 Y
52 PFUV1055Z PFUV1055Y COVER, GUIDE *1 1 *g 1 Y
53 --------------- PFGT2002Y-M NAME PLATE, AL [Made in Malaysia]
(for KX-FHD331)
1 *j 5 Y
--------------- PFGT2009Y-M NAME PLATE, AL [Made in Malaysia]
(for KX-FHD332)
1 *j 5 Y
91 PFKM1103Z1 PFKM1103X1 CABINET BODY, MAIN 1 *h 8 V
133 PFDE1191Z PFDE1191Y LEVER, PAPER TOP SENSOR 1 *d 1 X
135 PFBH1022Z1 PFBH1022Y1 PUSH BUTTON, HOOK 1 *e 1 W
151 PFUA1041Z PFUA1041Y CHASSIS, GEAR BASE 1 *e 1 W
160 PFHR1355Z PFHR1355Y ARM 1 *c 1 V
ACCESSORIES AND PACKING MATERIALS
A8 PFQX1696Z PFQX1696Y INSTRUCTION BOOK (for KX-FHD331) 1 *i&*j 8 X
PFQX1701Z PFQX1701Y INSTRUCTION BOOK (for KX-FHD332) 1 *i&*j 8 X
A9 PFQX1697Z PFQX1697Y INSTRUCTION BOOK (for Caller IQ)
(for KX-FHD331)
1 *i&*j 8 X
PFQX1702Z PFQX1702Y INSTRUCTION BOOK (for Caller IQ)
(for KX-FHD332)
1 *i&*j 8 X
A11 PQQX9957Z PFHP1114Z LEAFLET, PROTECTION PAPER 1 *a 8 X
2
KX-FHD331 / KX-FHD332
To Next Page
Loading...
