5
KX-FHD331/KX-FHD332
2
KX-FHD331/KX-FHD332
1 CHANGES
1.1. SUBJECT
1.2. REPLACEMENT PARTS LIST
1.2.1. REFERENCE CHART
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARI-
SON LISTS.
1. Improve performance Remarks:
*a: To correct error writing.
For RoHS-compliant parts marked by *R
*1 Use only RoHS parts(new parts) for the production sets which serial No. labels are after
6CXXXXXXXXX.
*2 Either original or RoHS parts(new parts) can be used for the production sets which serial No.
labels are before 6BXXXXXXXXX.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
To Next Page
Loading...
