Panasonic KX-FL511

3. Telephone
31
3 TelephoneAutomatic Dialing
3.1 Storing names and
telephone numbers into
one-touch dial
Up to 22 telephone numbers can be stored in
one-touch dial for quick access.
L Station 1 to 3 can be used alternatively as
broadcast keys (page 38).
L You can also send faxes using one-touch dial
(page 37).
1 Press {DIRECTORY PROGRAM}.
2 Select the desired station key.
For stations 1–3:
1. Press one of the station keys.
2. Press {SET}.
For stations 4–11:
Press one of the station keys.
For stations 12–22:
Press {LOWER}, then press one of the
station keys.
3 Enter the name, up to 10 characters (page
29 for instructions).
4 Press {SET}.
5 Enter the telephone number, up to 30 digits.
6 Press {SET}.
L To program other entries, repeat steps 2
to 6.
7 Press {DIRECTORY PROGRAM}.
Helpful hints:
L You can confirm the stored entries in the
telephone number list (page 66).
Note:
L A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect character/number, and then make the
correction.
To delete a character/number
Press {<} or {>} to move the cursor to the
character/number you want to delete, and press
{STOP}.
3.2 Storing names and
telephone numbers into
the navigator directory
Up to 100 telephone numbers can be stored in
the navigator directory for quick access.
L You can also send faxes using the navigator
directory (page 37).
1 Press {DIRECTORY PROGRAM}.
2 Press {>}.
3 Enter the name, up to 10 characters (see
page 29 for instructions).
4 Press {SET}.
5 Enter the telephone number, up to 30 digits.
6 Press {SET}.
L To program other entries, repeat steps 3
to 6.
7 Press {DIRECTORY PROGRAM}.
Helpful hints:
L For your convenience, HELP-FAX (1-800-
435-7329) has been pre-programmed. If you
cannot solve a problem, call using this entry
{SET}{LOWER}
{STOP}
Station keys
{<}{>}
{DIRECTORY PROGRAM}
{SET}
{STOP}
{<}{>}
{DIRECTORY PROGRAM}
FL511.book Page 31 Thursday, April 17, 2003 1:42 PM