Operating Instructions
76
3. Click [Save] when finished.
• New settings are saved. If the [Pan Range] or [Tilt Range] settings are
changed, the camera turns to the home position.
• When finished, "Success!" is displayed.
4. Click [Go to Camera page].
• The Camera page is displayed.
Color Night
View
• In the color night view mode, the camera image becomes
brighter in a low illuminance. The camera image returns
normal operation in a bright location.
• If you enable the color night view mode, refresh interval
may slow down.
Note
In the color night view mode, the image may have white or
colored circles around the object. This is not a problem,
since it is a CMOS sensor characteristic.
*1
See page 77 for details about pan/tilt range settings.
*2
These home position settings are displayed as you set on page 26.
Setting Description
To Next Page
Loading...
