Replacing the battery
R USE ONLY the specified battery.
1 Remove the screw from the battery cover.
2 R
emove the battery cover.
3 R
emove the currently used battery.
4 A
ttach and insert the replacement battery.
BLK: black
RED
5 I
nsert the tabs (A) into the slots, and
then close the battery cover (B).
6 D
rive the screw into the battery cover.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
*
1
*1 Two beeps sound from the monitor unit
e
very 3 minutes when the battery needs
charging.
Lithium Ion (Li-Ion) Polymer
b
attery performance (supplied
battery)
Operation Operating time
In continuous use 5 hours max.
Not in use (standby) 13 hours max.
For assistance, please visit http://shop.panasonic.com/support
15
Getting Started
HN4001_(en_en)_0508_ver.010.pdf 15 2019/05/08 16:24:08
To Next Page
Loading...
