Panasonic KX-MB772CX - Page 79

KX-MB262CX/KX-MB772CX
12.5.
2.
When
the r
ecor
ding
pa
per is
not fe
d into
the u
nit pr
oper
ly
The display will show the following.
Note:
•
If the error message is still displayed, check the rec
ording paper specifications and re-inst
all recording paper
.
1.
Pull the paper input tray until it clicks into place, then put it com-
pletely out, lifting the front part of the tray. Remove the recording
paper and straighten.
2.
Re-load the recording
paper.
3.
Insert the paper input tray to
the unit, lifting the front part
of the tray.
Then push it completely into the unit.