Setting up
Connections
Connect the AC adaptor plug to the unit until you hear a click.
Connect the AC adaptor to the power outlet.
KX-PRSA10: Fasten the cord by hooking it.
n KX-PRSA10 n KX-PRWA10
Note:
R Use only the supplied Panasonic AC adaptor PNLV233E.
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
Battery installation/Battery charging
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (A).
R Do NOT use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
Charge for about 7 hours.
R Confirm “Charging” is displayed (B).
R When the batteries are fully charged, “Fully charged” is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
3
Installation
To Next Page
Loading...
