Panasonic KX-PW211DL - Installations and Connections

44
Installations and connections
After the Power On...
1 This unit will automatically select the dialing
mode (Pulse/Tone).
2 When the following is displayed, press
(Stop).
ｴﾗﾝﾃﾞｹｰﾀｲﾉｾｯﾃｲ
［ ｹｯﾃｲ ］ ｵｽ
Connecting the main unit Setting up the portable handset
(KX-FKN526)
Power cord
Telephone line cord
(supplied accessory)
Wall jack
Power outlet
(AC 100 V)
3 Connect the telephone line cord.
4 Connect the power cord.
1 Raise the antenna.
2 Connect the cord and
place the handset on
the main unit.
1 Press on the battery cover and slide the cover.
2 Insert the battery into the compartment and close the
battery cover.

After your Panasonic battery is fully charged,
it will last up to about 5 hours of conversation.
Battery
If you cannot make a call...
Set the dialing mode with the main unit.
1. Press (Function).
2.
Press .
3. Press (Search button) repeatedly until the
desired setting is selected.
4. Press
(Set).
5. Press
(Stop).
Charger
Power outlet
(AC 100 V)
3 Connect the charger to the power outlet, then place
the portable handset on the charger for about
10 hours.
Example :

ﾌﾟｯｼｭ : Tone
 20 : Pulse (20 PPS)
10 : Pulse (10 PPS)
ｼﾞﾄﾞｳ: Auto (Default)
ｶｲｾﾝｼｭﾍﾞﾂ ＝ ｼﾞﾄﾞｳ

［ , ］ → ［ ｹｯﾃｲ ］ ｵｽ
KX-PW211DL_QG.indb 4 2008/09/11 13:05:20