Panasonic KX-T30810 - Pulse;Tone Conversion

Use of Other Features (cont.)
Pulse/Tone Conversion
When the dialing mode is
required to change a
pulse
mode to a tone mode in
one
dialing sequence, t~is
feature is used.
(e.g. computer-accessed
long distance service)
DIAL THE
PHONE
NUMBER
DIAL"*#"
DIAL THE
PHONE
NUMBER
•When you dial using this feature, you must use the
line selected in a pulse mode.
• Phone number after dialing '' * #" will be changed
to tone mode.
•A rotary phone is not available for the Pulse/Tone
Conversion.
•You should press"*" and"#" buttons within
1
0 seconds after the number of the long distance
service company.
• When you use a standard telephone equipped
with automatic dialer, be careful the followings:
Example: Computer-accessed long distance
service
•Local access telephone number of the alternate
long distance service company 765-4321,
Authorization no. 0123456,
Long distance no. 543-210-9876
•Pulse mode is required by local access
telephone number
of the alternate long distance
service company.
•Service of MCI, SPRINT, METRO or other
systems is used.
·lrnm···GJH~lEJI B B
I 1. Pulse mode .1!1. Tone mode ~
Set to PULSE Switch to TONE
~GJ···m ~~···m
1-
Tone mode
_,
Store the long distance service company no. in
PULSE mode, and switch to the TONE mode to
memory the
following numbers.
-19-