For KX-T7433 and KX-T7436 Users
AUTO ANSWER/MUTE
AUTO ANSWER is used to answer
an intercom call.
MUTE is used to listen to the other
party without them hearing you.
AUTO DIAL/STORE
Used for speed dialing in the system
or storing program changes.
CONF
Used to make a three-party conference.
FLASH
Used to disconnect the current call
and make another call with holding
the same outside line.
Flexible Outside (CO) Line Button
Used to make or receive an outside
call, or access a feature if the button
is assigned as a One-touch dialing
button.
Function Button
Used to perform the displayed
function or operation.
FWD/DND
Used to perform Call Forwarding or
Do Not Disturb.
HOLD
Used to place a call on hold.
INTERCOM
Used to make or receive intercom calls.
Jog Dial
Used to adjust the volume and the
display contrast or select desired items
for each functions.
MESSAGE
Used to leave a notification or call
back the party who left the
notification.
MODE
Used to set the display to access a
feature.
PAUSE
Used to insert a pause in speed dial
numbers or in other numbers.
PROGRAM
Used to enter and exit the
programming mode.
REDIAL
Used to redial.
SELECT
Used to select the displayed function
or to call the displayed phone
number.
SHIFT
Used to alternate the sub function on
the display.
Soft Button
Used to perform the function or
operation that appears on the bottom
line of the display.
SP-PHONE
Used for the handsfree operation.
TRANSFER
Used to transfer a call to another
party.
To Next Page
Loading...
