Panasonic KX-TG5631 User Manual

PQQW15087XA DM1105SY2016
Setting up
For further information, visit http://www.panasonic.com/phonehelp
Base unit CHARGE 7 HOURS
Handset
Noise filter (For DSL Service users)
Hook
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
B
A
Charger
Press plug
firmly.
“Click”
(120 V AC, 60 Hz)
OR
Charging
5
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Confirm CHARGE
indicator is on.
Confirm
“Charging” is
displayed.
KX-TG5632/KX-TG5633/KX-TG5634/KX-TG5652/
KX-TG5653
Model No. KX-TG5631/KX-TG5632
KX-TG5633/KX-TG5634
KX-TG5651/KX-TG5652
KX-TG5653
Quick Guide
TG563x_565x_QG(e).fm Page 1 Monday, January 23, 2006 5:35 PM

Panasonic KX-TG5631 Specifications

General

Brand	Panasonic
Model	KX-TG5631
Category	Cordless Telephone
Language	English

Summary

Setting up

Base unit Setup

Connect base unit, AC adapter, and optional noise filter to phone jack.

Charger Setup

Connect charger to base unit and handset for initial charging.

Quick Troubleshooting - No Link

Handset 'No Link' Error

Troubleshooting steps for the "No link to base" error message.

Quick Troubleshooting - No Dial Tone

No Dial Tone from Handset

Diagnosing and resolving issues when no dial tone is heard.

Registering Handset to Base Unit

Initiate Handset Registration

Steps to start the registration process on the handset.

Initiate Base Unit Registration

Steps to start registration on the base unit for various models.

Confirm Handset Registration

Finalizing the registration process on the handset.

Important Support Information