Panasonic KX-TG5771 - Page 8

– 8 –
Quick troubleshooting
Lift up the handset from
the base unit.
Press {C} (TALK) at the
handset, then check if the
display shows “Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
KX-TGA570
(included with
KX-TG5771)
KX-TGA571
(included with
KX-TG5776/
KX-TG5777)
KX-TGA570
(included with
KX-TG5771)
Example: KX-TGA570
(included with KX-TG5771)
Example: KX-TGA570
(included with KX-TG5771)
KX-TGA571
(included with
KX-TG5776/
KX-TG5777)
“No link to base.
Move closer to
base, try again.”
is displayed.
“Talk” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2 No dial tone is heard from handset.
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Still no dial tone
{C}
{s}
No link to base.
Move closer to
base, try again.
1
Talk
00-00-00
IN USE
TG577x_QG(e).fm Page 8 Monday, February 20, 2006 3:22 PM