Panasonic KX-TGA101C - Battery Installation and Charging

3
Battery installation
1
Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
2 Insert the batteries negative (T) end
first. Close the handset cover.
Important:
LUSE ONLY Ni-MH batteries AAA
(R03) size.
LDo NOT use Alkaline/Manganese/Ni-
Cd batteries.
LInstall the batteries in proper order
(S, T), matching the correct polarity.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-
822-8837) for information on how to
recycle this battery.
Battery charge
Place the handset on the charger for 7
hours before initial use.
Note:
LIf you want to use the handset
immediately, charge the batteries for
at least 15 minutes.
LTo ensure that the batteries charge
properly, clean the charge contacts of
the handset and charger with a soft,
dry cloth once a month. Clean more
often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Panasonic battery performance
Note:
LThe handset can be left on the
charger without any ill effect on the
batteries.
LThe battery level may not be
displayed correctly or the entire
display may go blank after you
replace the batteries. In this case,
place the handset on the charger and
let charge for 7 hours.
Operation Operating time
While in use
(talking)
Up to 17 hours
While not in use
(standby)
Up to 11 days
Charge
contacts
TGA101C(e).auto.fmPage3Wednesday,March7,20072:49PM