Panasonic KX-TGA101C - Handset Registration and Configuration; Accessory Usage: Belt Clip

4
Registration
Register the handset to a KX-
TG1032C/KX-TG1033C/KX-TG1034C
base unit.
1 Base unit:
Press and hold {LOCATOR} until
the registration tone sounds.
LIf all registered handsets start
ringing, press {LOCATOR} to
stop, then repeat this step.
LAfter the base unit beeps, the rest
of the procedure must be
completed within 1 minute and 30
seconds.
2 Handset:
Press {OK}, then wait until a beep
sounds and w stops flashing.
Changing the display
language
1
{MENU}
2 {V}/{^}: “Handset settings” i
{OK}
3 {V}/{^}: “Display settings” i
{OK}
4 {V}/{^}: “Change language” i
{OK}
5 {V}/{^}: Select the desired setting.
6 {OK} i {OFF}
Belt clip
You can hang the handset on your belt
or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip (A),
pull the right edge in the direction of the
arrow (B).
A
B
TGA101C(e).auto.fmPage4Wednesday,March7,20072:49PM