Panasonic KX-TGBA85 - Making and Answering Calls; Making Calls and Adjustments

14
For assistance, please visit http://shop.panasonic.com/support
Making and Answering Calls
Using the speakerphone
1 During a conversation with the corded
handset, press
L
SP-PHONE
R
to turn on the
speakerphone.
● You can place the corded handset on the
cradle.
● Speak into the base unit microphone.
● Speak alternately with the other party.
2 When you nish talking, press
L
SP-PHONE
R
.
Note:
● For best performance, use the speakerphone
in a quiet environment.
● To switch to the receiver, lift the corded
handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list (each 24 digits max.).
1
L
Redial
R
.
2
LsR
: Select the desired entry.
3 Lift the corded handset or press
L
SP-PHONE
R
.
Deleting an entry or all entries in the redial list
1
L
Redial
R
.
2
LsR
: Select the desired entry, press
L
OK
R
.
3
L
OK
R
.
L
d
R
“ Delete” or “ Delete all”.
4
L
OK
R
. “ Conrm?”.
5
L
OK
R
to conrm or
L
BACK
R
to cancel.
Adjusting the receiver or speaker
volume
Handset / Base unit
LsR
repeatedly while talking.
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed.
Example: If you need to dial the line access
number “9” when making outside calls with
a PBX:
Making calls
Using the handset
1 Lift the handset and dial the phone number.
● To correct a digit, press
L
Clear
R
.
2
L
TALK/SP-PHONE
R
.
● To make the call using the speakerphone,
press
L
TALK/SP-PHONE
R
.
3 When you nish talking, press
L
OFF
R
or place
the handset on the charger.
Note:
● While talking, you can switch between the
receiver and the speakerphone by pressing
L
TALK/SP-PHONE
R
.
● In step 1, you can store the dialed phone
number to the phonebook by pressing
L
Save
R
.
Auto hang-up: You can end a call simply by
placing the handset on the charger (page 24).
Making a call using the redial list
The last 10 phone numbers dialed are stored in
the redial list in each unit (each 24 digits max.).
1
L
Redial
R
.
2
LsR
: Select the desired entry.
3
L
TALK/SP-PHONE
R
.
Deleting an entry or all entries in the redial list
1
L
Redial
R
.
2
LsR
: Select the desired entry, press
L
OK
R
.
3
L
OK
R
.
L
d
R
“ Delete” or “ Delete all”.
4
L
OK
R
. “ Conrm?”.
5
L
OK
R
to conrm or
L
BACK
R
to cancel.
Using the base unit
1 Dial the phone number.
● To correct a digit, press
L
Clear
R
.
2 Lift the corded handset.
3 When you nish talking, place the corded
handset on the cradle.
Note:
● You can also dial the phone number after
lifting the corded handset.