Panasonic KX-TGCA35 - Battery Installation and Charging; Registering Handset to Base Unit

Note:
R The AC
adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Import
ant:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R Do NOT
use Alkaline/Manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
Charge
for about 7 hours.
R Confirm “Charging” is displayed (
2
).
R When t
he batteries are fully charged, “Fully charged” is displayed.
1
2
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
, ) and the charge contacts with a dry cloth and
c
h
a
r
g
e
again.
Registering a handset to a base unit
1 Base unit:
Press and hold M N for about 5 seconds. R If all registered
handsets start ringing, press M N
again to stop, then repeat this step.
For assistance, please visit http://shop.panasonic.com/support
3
Installation