To Next PageTo Next PageWhy can I make and answer cellular calls but cannot hear a sound on my Panasonic Cordless Telephone?
If you can make and answer cellular calls but cannot hear a sound, the Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. Also, disconnect and reconnect the base unit AC adaptor and try again.
Why is caller information not announced on my Panasonic Cordless Telephone?
If caller information is not being announced, ensure that the ringer volume for landline or cellular line is not turned off by adjusting the ringer volume. The Talking Caller ID feature may be turned off, so turn it on. The ring as cell mode may be set to “On (without Talking CID)”, so change the mode. If the number of rings for the answering system is set to “2 rings” or “Toll saver”, select a different setting. Also, your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call.
Why is caller information displayed or announced late on my Panasonic Cordless Telephone?
Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. Move closer to the base unit.
What to do if my Panasonic Cordless Telephone does not ring?
If your Panasonic Cordless Telephone handset or base unit isn't ringing, make sure the ringer volume for landline or cellular line is not turned off by adjusting the ringer volume. Check if silent mode is turned on and turn it off. Also, ensure the ringer volume isn't turned off by pressing and holding 0; press and hold 0 again to turn it on. If you are using a cellular line, ensure that the unit which is selected to ring for cellular calls is correctly set.
What to do if my Panasonic Cordless Telephone batteries still flashes after fully charged?
If, after fully charging the batteries, the indicator still flashes, the display shows a specific symbol, or the operating time seems shorter, clean the battery ends and the charge contacts with a dry cloth and charge again. It may also be time to replace the batteries.
Why can't I make or answer cellular calls with my Panasonic Cordless Telephone handset?
Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). The cellular phone may be being used separately from your system.
Why can't I connect a cellular phone to my Panasonic Cordless Telephone base unit?
If you cannot connect a cellular phone to the base unit, confirm that your cellular phone is turned on and within the base unit range. Ensure your cellular phone’s Bluetooth feature is turned on. Also, the cellular phone may not have been paired to the base unit, so pair the cellular phone. If your cellular phone is already connected to another Bluetooth device, disconnect the device, then perform the connecting procedure to the base unit. If your cellular phone is already registered on another Panasonic DECT phone, remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone.
Why has the time on my Panasonic Cordless Telephone shifted?
If the time on the unit has shifted, incorrect time information from incoming Caller ID may be changing the time. Set the time adjustment to “Manual” (off).
Why can't I have a conversation using the headset with my Panasonic Cordless Telephone?
To use a headset, confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. Your Bluetooth headset may not be paired; pair it. Turn your headset off, then turn it on and try again. If your headset is already connected to another Bluetooth device, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line).
Why I cannot pair a cellular phone to Panasonic Cordless Telephone base unit?
Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. Also, confirm that the Bluetooth feature of your cellular phone is turned on. The Bluetooth technology on your cellular phone may not be functioning normally, so turn off and on your cellular phone. If your cellular phone is already connected to another Bluetooth device, turn it off or disconnect it from your cellular phone. Some cellular phones may require you to enter the Bluetooth PIN to pairing, so confirm that you entered the correct PIN.
General| Brand | Panasonic |
|---|---|
| Model | KX-TGDA51 |
| DECT 6.0 Technology | Yes |
| Frequency | 1.9 GHz |
| Expandable | Yes |
| Display | Yes |
| Backlit Keypad | Yes |
| Speakerphone | Yes |
| Headset Jack | Yes |
| Ringer Volume Control | Yes |
| Wall Mountable | Yes |
| Battery Type | Ni-MH |
| Talk Time | Up to 10 hours |
| Intercom | Yes |
| Call Block | Yes |
| Silent Mode | Yes |
| Caller ID | Yes |
| Call Waiting | Yes |
| Type | Handset |
