Panasonic KX-TGEA40 - Setting Up; Connections;Wall Mounting; Battery Installation;Charging

Setting up
Connections/Wall mounting
Connect the AC adaptor to the power outlet.
Drive the screws (
1
) (not supplied) into the wall, if necessary.
2
27.2 mm (1
1
/1
6 inches)
2
1
12
Note:
R T
he AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
I
mportant:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R D
o NOT use alkaline/manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
C
harge for about 7 hours.
R Confirm “Charging” is displayed (
2
).
R When the batteries are fully charged, “Fully charged” is displayed.
1
2
For a
ssistance, please visit http://shop.panasonic.com/support
5
Installation
TGEA40(en-en)_1112_ver011.pdf 5 2015/11/12 11:18:34