Base unit
1 MCA
LL BLOCKN a MSELECTN
2 MbN: “Allow name list” a MSELECTN
3 MbN: Select the desired entry.
R After viewing, press MEXITN to exit.
4 MERASEN a MbN: “Yes” a MSELECTN
a MEXITN
Erasing all entries
Handset / Base unit
1 MCA
LL BLOCKN a MSELECTN
2 MbN: “Allow name list” a MSELECTN
3 MERASEN a MbN: “Yes” a MSELECTN
4 MbN: “Yes” a MSELECTN a MOFFN
Greeting message for automated
ca
ll block
Handset
Wh
en the unit answers a call, a greeting
message is played to the caller.
You can use either:
– your own greeting message and
pre-recorded greeting message
– pre-recorded greeting message
Recording a greeting message for
au
tomated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
“Hi, you have reached xxxxxxx (Name).”
“Thank you for your calling, You have reached
xxxxxxx (Name).”
“Hi, you have reached the xxxx (Name)
residence.”
1 MCALL BLOCKN a MSELECTN
2 MbN: “Automated call greeting” a
MSELECTN
3 MbN: “Record greeting” a MSELECTN
4 MbN: “Yes” a MSELECTN
5 After a beep sounds, hold the handset
a
bout 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
6 Press MSTOPN to stop recording.
7 The unit will play the recorded greeting
message for automated call block. a
MOFFN
Resetting to the pre-recorded
gr
eeting message for automated call
block
This procedure will erase your greeting
message for automated call block and reset to
the pre-recorded one.
1 MCALL BLOCKN a MSELECTN
2 MbN: “Automated call greeting” a
MSELECTN
3 MbN: “Pre-recorded” a MSELECTN
4 MYESN a MOFFN
Playing back the greeting message
fo
r automated call block
1 MCALL BLOCKN a MSELECTN
2 MbN: “Automated call greeting” a
MSELECTN
3 MbN: “Check greeting” a MSELECTN
4 To exit, press MOFFN.
For assistance, please visit http://shop.panasonic.com/support
43
Automated Call Block
To Next Page
Loading...
