Note for handset and base unit:
R T
he name stored in the phonebook will be
reflected in the redial list after you make a call
using that phonebook entry.
Storing caller information to the phonebook
Handset
n When a cellular phone is paired:
1 MCN CID
2 MbN: Select the desired entry. a MSELECTN
R To edit the number, press * (Edit)
repeatedly until the phone number is
shown in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
5 Continue from step 3, “Editing entries”,
page 40.
n When a cellular phone is not paired:
1 MCN CID
2 MbN: Select the desired entry. a MMENUN
R To edit the number: MbN: “Edit” a
MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format.
a MSAVEN a MbN: “Phonebook” a
MSELECTN a Go to step 4.
3 MbN: “Save phonebook” a MSELECTN
4 Continue from step 3, “Editing entries”,
page 40.
Base unit
1 MC
IDN
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the desired format.
3 MSAVEN
4 MbN: “Phonebook” a MSELECTN
5 Continue from step 3, “Editing entries”,
page 40.
Groups
G
roups can help you find entries in the phonebook
quickly and easily. You can change the group
name for groups 4-9 (“Friends”, “Family”, etc.). By
assigning different ringer tones for different groups
of callers, you can identify who is calling (ringer
I
D), if you have subscribed to Caller ID service.
Changing group names/setting ringer ID
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MFN
a MM
ENUN
Base unit: M
N a MM
ENUN
2 MbN: “Group” a MSELECTN
3 MbN: Select the desired group. a MSELECTN
R If you selected “Home”, “Cell 1”, or
“Cell 2” on the handset, go to step 5.
4 To change group names
MbN: “Group name” a MSELECTN a Edit
the name (10 characters max.). a MSAVEN
5 To set group ringer tone (handset)
MbN: Select the current setting of the group
ringer tone. a MSELECTN a MbN: Select the
desired ringer tone. a MSAVEN
6 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Finding and calling from a
p
honebook entry
Once you have found the desired entry using one
of the following 4 methods, make a call with your
unit.
n Using a cellular line:
Handset
1 MCELLN
R The unit starts dialing immediately in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make cellular calls
(page 20).
2 MbN: Select the desired cellular phone. a
MSELECTN
Base unit
P
ress MCELL 1N or MCELL 2N. a Lift the corded
handset.
n Using a landline:
Handset
M N
For assistance, please visit http://shop.panasonic.com/support
39
Phonebook
To Next Page
Loading...
