Sub-menu 1 Sub-menu 2 Settings Code Unit
Registration Register handset
– #130 55
Deregistration
*
2
– #131
56
Deregistration
*
2
– – #131
56
Battery saving
m
ode
–
On
<Off>
#150
11
Change language Display
<E
nglish>
Español
#110
/
15
Announcement
*
1
<E
nglish>
Español
#112
/
15
Main menu: “C
ustomer support”
Operation Code Unit
Displaying customer support Web address. #680
/
–
Main menu: “B
aby monitor”
Sub-menu 1 Sub-menu 2 Settings Code Unit
On/Off
–
On
<O
ff>
#268
53
Sensitivity level
– Low
<
Middle>
High
#269 54
Main menu: “K
ey detector”
*12
Sub-menu 1 Sub-menu 2 Settings Code Unit
Search
– – #655 –
Battery check
– –
*1 If you program these settings using one of the units, you do not need to program the same item using
a
nother unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 19).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 The preset melodies in this product (“Melody 1” - “Melody 10”) are used with permission of
© 2009 - 2012 Copyrights Vision Inc.
*8 The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of © 2013
Copyrights Vision Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 15).
*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 5). If
you select a melody, you cannot distinguish lines by their ringers.
For assistance, please visit http://shop.panasonic.com/support
51
Programming
To Next Page
Loading...
