Text message (SMS) alert
For iPhone
®
users
This feature alerts you on your DECT phone when
y
our paired cellular phone receives SMS
messages. The Link to Cell app is not required for
iPhone users.
Important:
R Your cellular phone must support Message
Access Profile (MAP) specification.
R For further information, refer to the instructions
on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings are
required.
– iPhone: Bluetooth must be turned on.
– Handset or base unit: “Alert On/Off”
must be turned on (page 62).
R If this feature does not work, turn on your
device’s Bluetooth feature, unplug the base
unit’s AC adaptor, and then reconnect it.
Alert settings for your DECT
p
hone
If your cellular phone is paired to the base unit and
receives notifications, the handset and/or base unit
can alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app to
enable the desired alerts (page 61).
Turning alert on/off
O
nce this feature is turned on, it will alert you on
the handset and base unit when your cellular
phone receives notifications.
– “On” (default): The handset and/or base unit
alert you.
– “Off”: The handset and/or base unit do not
alert you.
Handset / Base unit
1 For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
2 MbN:
Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Setting the voice alert
Y
ou can turn on/off the voice alert.
– “On” (default): The handset and/or base unit
notify you by voice announcement.
– “Off”: Voice announcement is not available as
alert.
Handset / Base unit
1 For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Selecting the alert tone
Handset
1 F
or CELL 1: MMENUN#6041
For CELL 2: MMENUN#6042
2 MbN: Select the desired setting. a MSAVEN
a MOFFN
Remote voice assist
For iPhone
®
and Android
™
smartphone users
You can use the handset or base unit to operate
t
he voice recognition feature of the paired cellular
phone (Siri
®
, Google Now
™
, or S Voice). For
example, you can speak into the handset or base
unit and command your cellular phone to make a
call.
Compatible voice recognition features
R Google Now, S Voice (Android 4.0 or later)
R Siri (iOS 8.0 or later)
Important:
R Your cellular phone must support the Hands
Free Profile (HFP) specification.
R In order to use this feature, your cellular phone’s
voice recognition feature must be ready to use.
– iPhone: Make sure Siri is turned on.
62
For assistance, please visit http://shop.panasonic.com/support
Using Bluetooth® Devices
To Next Page
Loading...
