EasyManua.ls Logo

Panasonic KX-TGHA20 - User Manual

Panasonic KX-TGHA20
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Manual
Additional Digital Cordless Handset
Model No. KX-TGEA20
KX-TGHA20
KX-TGEA20 KX-TGHA20
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following series of
Panasonic Digital Cordless Phone:
- KX-TGE210/KX-TGE230/KX-TGE240/KX-TGE260/KX-TGE270 (KX-TGEA20)
- KX-TGH260 (KX-TGHA20)
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
installation manual describes only the steps needed to register and begin using
the handset. Please read the base unit’s operating instructions for further details.
Please read this installation manual before using the unit and save it for future
reference.
For assistance, visit our Web site: http://www.panasonic.com/help
for customers in the U.S.A. or Puerto Rico.
Printed in Malaysia
PNQX6369ZA
PT1113MG0
TGEA_TGHA20(en)_1119_ver021.pdf 1 2013/11/19 11:47:23

Table of Contents

Questions and Answers

  • C
    Crystal WhiteSep 12, 2025
    Why is the 2nd caller’s information not displayed during an outside call on my Panasonic Telephone?
    • L
      Leah RasmussenSep 12, 2025
      In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your service provider/telephone company and subscribe to the desired service. After subscribing, you may need to contact your service provider/telephone company again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID).
  • M
    Melinda NguyenAug 25, 2025
    Why is my Panasonic Telephone handset beeping and/or flashing?
    • A
      Ashley CrawfordAug 25, 2025
      If your handset is beeping and/or flashing, it likely means the battery charge is low. You should fully charge the batteries.
  • J
    Jeffrey PetersonAug 25, 2025
    How to fix time shifting on my Panasonic Telephone?
    • A
      Ashley HamiltonAug 26, 2025
      If the time on your unit has shifted, it may be due to incorrect time information from incoming Caller ID. Set the time adjustment to “Manual” (off).
  • L
    Laura CobbSep 23, 2025
    Why does my Panasonic Telephone base unit beep?
    • S
      Scott Coleman DDSSep 23, 2025
      If the base unit is beeping, it indicates that new messages have been recorded. Listen to the new messages.
  • M
    Mason ZamoraSep 13, 2025
    Why can't I have a conversation using the headset with my Panasonic Telephone?
    • K
      Kevin SmithSep 13, 2025
      If you cannot have a conversation using the headset: * Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. * Your Bluetooth headset is not paired. Pair it. * Turn your headset off, then turn it on and try again.
  • M
    Melissa RossSep 18, 2025
    Why does my Panasonic Telephone unit not emit the specified number of rings?
    • B
      Brett BrownSep 18, 2025
      If the unit does not emit the specified number of rings, it could be because if the first ring is turned off, the number of rings decreases by 1 from the specified number of rings.
  • B
    Brittany BryanSep 6, 2025
    What to do if I cannot make local calls with the Panasonic Telephone handset using a cellular line?
    • M
      Michael KruegerSep 6, 2025
      If you cannot make local calls with the handset using a cellular line, you may need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls.
  • C
    Christopher NguyenSep 6, 2025
    Why can't I make or answer cellular calls with my Panasonic Telephone handset?
    • C
      Chad SchwartzSep 7, 2025
      If you are unable to make or answer cellular calls with the handset, consider the following: * Depending on the cellular phone’s compatibility, you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit. * Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). * The cellular phone is being used separately from your system.
  • T
    ttaylorSep 23, 2025
    How to change the PIN on my Panasonic Telephone?
    • B
      Brian WalkerSep 23, 2025
      Change the PIN using the following method: 1 MMENUN (right soft key) #619 2 *7000 3 Enter the new 4-digit PIN. a MOKN 4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN
  • D
    Darius StoneAug 30, 2025
    Why is the handset display blank or dark on my Panasonic Telephone?
    • T
      Tyler GalvanAug 30, 2025
      If your handset display is blank or dark, it could be due to these reasons: * The handset is in screen saver mode. To activate the display, press M N during a call or MOFFN at other times. * “LCD backlight” is set to “Off” while on charge. You can change this setting.

Panasonic KX-TGHA20 Specifications

General IconGeneral
BrandPanasonic
ModelKX-TGHA20
CategoryHandsets
LanguageEnglish

Related product manuals