To Next PageTo Next PageWhat to do if my Panasonic KX-TGP550 T04 does not work?
If your Panasonic Cordless Telephone is not working, ensure the batteries are correctly installed and fully charged. Also, check all connections. Try resetting the unit by unplugging the AC adapter, then reconnecting it. If it still fails, the handset may need to be registered to the base unit.
Why does my Panasonic KX-TGP550 T04 handset beep and/or flash?
If the handset of your Panasonic Cordless Telephone is beeping and/or flashing, it indicates that the battery charge is low. You should fully charge the batteries.
What to do if I cannot hear a dial tone on my Panasonic Cordless Telephone?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, confirm the Ethernet cable is properly connected. Also, your network settings may not be correct. Resetting all equipment (modem, router, hub, base unit, and computer) may resolve the issue. If you cannot access Internet Web pages using your computer, check to see if your phone system is having connection issues in your area.
What to do if I fully charged the batteries, but the battery indicator still flashes or shows zero on my Panasonic KX-TGP550 T04 Cordless Telephone?
If you have fully charged the batteries of your Panasonic Cordless Telephone, but the battery indicator still flashes or shows zero, clean the charge contacts and charge again. If the issue persists, it may be time to replace the batteries.
What to do if I cannot make a call with my Panasonic KX-TGP550 T04?
If you cannot make a call with your Panasonic Cordless Telephone, first check if the STATUS indicator is lit green. Ensure that the base unit is not downloading a software update. Also, make sure the handset is not too far from the base unit.
What to do if I cannot program items on my Panasonic KX-TGP550 T04?
If you cannot program items on your Panasonic Cordless Telephone, it may be because another handset or the base unit is currently in use. Also, programming is not possible while the base unit is downloading data. Wait until the STATUS indicator stops flashing and lights in steady green, then try again.
What to do if I cannot register a handset to the base unit of my Panasonic KX-TGP550 T04 Cordless Telephone?
If you cannot register a handset to the base unit of your Panasonic Cordless Telephone, the maximum number of handsets (6) may already be registered. Cancel unused handset registrations from the base unit. Also, place the handset and the base unit away from other electrical appliances.
What to do if the STATUS indicator is off on my Panasonic KX-TGP550 T04 Cordless Telephone?
If the STATUS indicator is off on your Panasonic Cordless Telephone, it could mean the base unit power is off, the Ethernet cable isn't properly connected, your network devices are turned off, or the base unit power is booting up. Check these elements.
What to do if the STATUS indicator continues flashing in amber on my Panasonic KX-TGP550 T04?
If the STATUS indicator continues flashing in amber on your Panasonic Cordless Telephone, an IP address may not have been acquired or the static IP address is not appropriate. Check the base unit’s IP address and your network devices’ connections. Resetting all the equipment might also help. If you cannot access Internet Web pages using your computer, check to see if your phone system is having connection issues in your area.
Why is the STATUS indicator lit in amber even though the Ethernet cable is connected properly to my Panasonic KX-TGP550 T04 Cordless Telephone?
If the STATUS indicator is lit in amber even though the Ethernet cable is connected properly to your Panasonic Cordless Telephone, the base unit’s IP address may conflict with the IP addresses of other devices on your local network. Check the base unit’s static IP address and the IP addresses of the other devices on your local network. If necessary, change the base unit’s static IP address.
General| GAP compatible | Yes |
|---|---|
| Speakerphone | Yes |
| Caller ID | Yes |
| Color | Black |
| SIP protocol | Yes |
| Call waiting | Yes |
| Conference call | Yes |
| Call forwarding | Yes |
| Redialing | Yes |
| Microphone mute | Yes |
| Backlight display | Yes |
| Ethernet LAN | Yes |
| Power over Ethernet (PoE) | Yes |
| Voicemail | Yes |
| Intercom | Yes |
| Maximum Indoor Range | 50 m |
| Maximum Outdoor Range | 300 m |
| Voice codecs | G.711 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Headset Jack | Yes |
| Power Source | AC |
| Type | Cordless Telephone |
