Panasonic KX-TGP600 - Page 5

5
Nr. Description Picture
1.
Select "Add new target" on the administration
portal in the tab Targets.
Find more information in the
administration portal manual.
2.
A new window appears. Insert the name,
the extension and/or the trunk.
Select then your mobile handset from
the device list: device is
[MAC address of the base station] -
[IPEI of the mobile handset]
3.
For all other settings, see the
administration portal manual.
4. Save your entries.
Registering mobile handset to the DECT base station
The KX-TPA60 mobile handset is already registered at the telephone system when you
receive it. In case you use the KX-TPA60, you will not need to carry out the following
steps.
Press and hold the key on the base station for approx. 4 seconds until the LED starts to blink
slowly. THen press the "OK" key on the mobile handset.
The mobile handset now scans for the DECT base station.
Following you need to register the mobile handset to the base station. You can do it directly over the
menu of your Panasonic mobile handset.
You will see this on the display: "Register Unit". Press OK.1.
Now press (and hold) the OK button for approx. 5 seconds.2.
The mobile handset registers automatically.3.
After registration you will see following information on the display: Time and Targets,4.
"extension:name"