19
7.3.3. Removal of the Main ANT Unit, Bat-
tery, Sub FPC Unit and Back Case
Unit
(Fig. D7)
7.3.4. Removal of the Battery P.C.B. and
Control Ring Unit
(Fig. D8)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on lens surfaces.
• LCD image is fine. (No dust and/or dirt on it, and no gradient
images.)