5
2.2. How to Replace the Lithium Ion Battery
Please refer to the disassembly procedure for replacement method.
NOTE:
This Lithium Ion battery is a critical component.
It must never be subjected to excessive heat or discharge.
It must therefore only be fitted in requirement designed specifically for its use.
Replacement batteries must be of same type and manufacture.
They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
NOTE:
Above caution is applicable for a battery pack which is for DMC-CM1 series, as well.
To Next Page
Loading...
