Need help?Do you have a question about the Panasonic Limux DMC-CM1P and is the answer not in the manual?
General| Sensor Type | MOS |
|---|---|
| Sensor Size | 1 inch |
| Effective Megapixels | 20.1 MP |
| Lens | Leica DC Elmarit |
| ISO Range | 100-25600 |
| Shutter Speed | 60 - 1/16000 sec |
| RAM | 2 GB |
| Weight | 204 g |
| Type | Compact |
| Aperture | f/2.8 |
| Video Resolution | 4K (3840 x 2160) |
| Display | 4.7 inch LCD |
| Operating System | Android 4.4 |
| Storage | 16 GB |
| Connectivity | Wi-Fi, Bluetooth |
| Battery | 2600 mAh |
| Battery Life | Approx. 300 shots (CIPA standard) |
| Dimensions | 135.4 x 68.0 x 21.1 mm |
Essential safety rules for servicing equipment with special components.
Procedures for cold and hot checks to prevent shock hazards.
Techniques to reduce component damage from static electricity.
Critical component replacement, safety, and disposal guidelines.
Overview of service manual scope and key notices.
Notices for lens, PCB, and front cover unit replacements.
Instructions for replacing the Main P.C.B. unit, including IMEI management.
Guidance on firmware updates, SIM card, and personal data handling.
Details on lead-free solder composition and usage for repairs.
How to identify camera model suffixes from nameplates.
Detailed technical specifications for the DMC-CM1P digital camera.
Details on Wireless LAN, Bluetooth, Cellular, NFC, GPS, and AC adaptor.
Identifies and describes the function of external controls and components.
Lists specific tools and fixtures required for servicing the unit.
Important considerations after replacing the Main P.C.B. unit.
Step-by-step flow for disassembling and assembling the unit.
Diagram showing the location of main P.C.B. and battery P.C.B. units.
Step-by-step guide for removing the LCD module and front cover.
Procedure for removing the lens unit and main P.C.B. unit.
Instructions for removing antenna, battery, sub FPC, and back case.
Steps for removing the battery P.C.B. and control ring unit.
Procedure for removing the MOS unit carefully to avoid dust.
Using the tape positioning tool to correctly apply cover glass tape.
Guide for installing the LCD module unit using the LCD sealing tool.
Table detailing necessary adjustments after replacing specific parts.
Guidelines for safely cleaning the camera's lens and LCD panel.
To Next Page