EasyManua.ls Logo

Panasonic LJ-SK56A - User Manual

Panasonic LJ-SK56A
132 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User's Manual
Installation Manual
3 Confirming Product Number
System Configuration
- Only qualified
Installation Manual
Lithium-ion Storage Battery System
Model No. LJ-SK56A
Lithium-ion Battery
Model No. LJ-SBK01
Network Adaptor
Model No. LJ-NA02
- Thank you for purchasing the Panasonic Lithium-ion storage battery system.
- Before installing the product, please read this manual carefully and follow all safety precautions at all times.
- After the installation, keep this manual and the User's Manual for future reference.
persons with the appropriate skills are allowed to perform the tasks described in this manual.
- After the installation, use this manual to check that the product operates correctly. Also, use the User's Manual to
explain how to use and perform day to day operation of the product to the customer.
- If the product fails, even within the warranty period, due to non-conformance with the Installation Manual, the User's
Manual or the caution labels attached to the product, it will not be repaired free of charge.
- For disposal, please contact your Household Hazardous waste depot.
Table of Contents
Safety Precautions
Installation
1 Typical ........................ 7
2 Product Description ......................................12
........................ 17
4Mounting of System and Battery.................. 20
5Electrical Connection of System and Battery .. 29
6Mounting of Network Adaptor ...................... 40
7 Electrical Connection of Network Adaptor ... 43
Setup
1 Control Panel ............................................... 50
2 List of Commands in Work Setting Mode ... 52
3 Setting Procedures ...................................... 54
4 Checking Energization ................................. 55
5 Setting Date/Time ........................................57
6 Setting Parameters for Installer ................... 60
7 Setting Parameters for Grid Operator .......... 68
8Test Run ...................................................... 93
9 Checking the Network Adaptor Connections .. 97
10 Complete Settings ....................................... 99

Table of Contents

Questions and Answers

  • D
    Deborah SimmonsAug 16, 2025
    What to do if my Panasonic LJ-SK56A Battery Charger system does not work?
    • J
      James Ross MDAug 16, 2025
      First, check if the protection device is turned off. Also, verify if any timers have been set. Finally, check the remaining battery level. Note that during On-line or DRED mode, the system may not work according to the user's settings.
  • N
    Nancy HendersonAug 19, 2025
    What to do if my Panasonic LJ-SK56A Battery Charger stops charging even though the battery is not full?
    • C
      Corey JonesAug 19, 2025
      Charging may be limited for battery protection if the battery temperature is too low or too high. Also, check the protection device in the distribution board, as a power failure or the storage battery system's protection device being turned off could be the cause.
  • K
    Kathryn ThompsonAug 22, 2025
    Why does my Panasonic Battery Charger stop charging?
    • J
      Joshua DennisAug 22, 2025
      The battery may be full. The battery indicator on the control panel turns off from orange when the batteries are full.
  • E
    Emily SanchezAug 26, 2025
    What to do if the stand-alone socket on my Panasonic Battery Charger does not supply power?
    • M
      Mark WeaverAug 26, 2025
      The stand-alone socket cannot be used during Grid operation. Also, the switch near the Stand-alone Socket-outlet may be off, meaning that output power from the Stand-alone Socket-outlet is not available. For the issue with Stand-alone breaker, please contact installer or shop you bought this product.
  • H
    halechristineAug 28, 2025
    What does E100 mean on my Panasonic LJ-SK56A Battery Charger?
    • S
      Susan GreenAug 28, 2025
      The storage battery systems, up to three, can be operated in cooperation. One of them stops because of a grid-side problem, and other inverters stop. If the grid problem is resolved, this error will be canceled automatically.
  • N
    nelsondaveAug 31, 2025
    What does P170 mean on my Panasonic LJ-SK56A?
    • J
      jasmine49Aug 31, 2025
      Check the load connected to the electrical outlet for stand-alone operation. Normal operation will resume automatically after the abnormality is eliminated.
  • J
    John BellSep 3, 2025
    What does it mean if my Panasonic Battery Charger displays P660 or P700?
    • S
      Stacey WilsonSep 3, 2025
      If the temperature of the built-in battery falls within the operating temperature range, the product will resume operation automatically.
  • K
    Kimberly BruceSep 6, 2025
    What to do if my Panasonic LJ-SK56A displays PXXX error other than P170, P620, P660, P690, P700?
    • D
      David MorrisonSep 6, 2025
      After an abnormality is eliminated, the product will resume operation automatically. If operation does not resume, please contact the repair service.
  • M
    Matthew GeorgeSep 9, 2025
    Why does my Panasonic Battery Charger stop discharging even though the battery is empty?
    • K
      Kristen DunnSep 9, 2025
      Discharging may be limited for battery protection if the battery temperature is too high or too low. During on-line system mode, discharging stops before reaching 0% of remaining battery level for blackout. Depending on the battery's condition, it might not be able to be discharged down to 0%.
  • D
    David TorresSep 12, 2025
    Why is my Panasonic LJ-SK56A Battery Charger not charging or discharging at certain times?
    • D
      dcamachoSep 12, 2025
      To correct the remaining battery level, charging and discharging operations are stopped once a day, specifically from 3:00 to 3:30.

Panasonic LJ-SK56A Specifications

General IconGeneral
BrandPanasonic
ModelLJ-SK56A
CategoryBattery Charger
LanguageEnglish

Related product manuals