A-10
Formatting of SuperDisk / 2DD or 2HD disk
for Windows 95 / 98 / NT4.0
(You can also use the Formater attached with Windows 95(OSR2.x), Windows 98 or
Windows NT4.0 .)
1. Insert a disk that you wish to format into the SuperDisk drive.
2. Right-click on the " Removable Disk " or " 3 1/2 Floppy " (Windows 95(OSR2.x)
/ Windows 98 / Windows NT4.0) icon.
3. Left-click on the " Format utility For SuperDisk ".
4. " Format Utility for SuperDisk " window appears.
Follow the procedures displayed on the screen to perform formatting of disk.
Note : Low-level formatting for SuperDisk disk is not supported.
for DOS / Windows 3.1
If your system is under Windows 3.1, reach the DOS prompt C:\.
(assumes that your SuperDisk drive is designed "D" and your hard disk drive "C".)
1. Insert a disk that you wish to format into the SuperDisk drive.
2. When formatting a 2DD or 2HD diskette, perform Standard formatting.
When formatting a SuperDisk disk, type " FORMAT D: " and press <Enter>.
* = one space
for Windows NT3.51
1. Open "Format Utility for SuperDisk" on "Program Manager" window.
2. Open "SuperDisk Format Utility" icon.
3. Follow the procedures on the screen.
To Next Page
Loading...
