A-4
2.2 REAR VIEW
➀ IDE / ATAPI CONNECTOR
Connects to host computer’s interface connector.
➁ JUMPER PIN
Place the jumper block according to the Master / Slave / CSEL configuration selected.
(See the figure in the next page.)
➂ DC (IN) CONNECTOR
CHAPTER 2 PARTS AND FUNCTIONS
2.1 FRONT VIEW
➀ DISK SLOT
Insert a disk.
➁ BUSY INDICATOR
Lights while a command from host is executed. (including read/ write operations)
➂ EJECT BUTTON
Ejects a disk.
➃ EMERGENCY EJECT HOLE
Insert an instrument such as straightened paper clip pin into this hole to manually
eject a disk. (See 4.1)
Note: The front panel is none with Model LKM-F933-1.
➀
➁➂➃
➀
➁➂
To Next Page
Loading...
