13. Others
188
• Some OS versions, including Windows 8, use two types of accounts: a local account and a
Microsoft account.
Be sure to use the user name and password for the local account.
• The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name,
the PC will not be recognised.
In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the
workgroup name to that of the PC you are connecting to. (P169)
• Please confirm login name and password are correctly typed.
• When the system time of Mac computer or Windows PC connected to a camera differs severely
from that of the camera, the camera cannot be connected to the computer or PC in some OSs.
> Please confirm [Clock Set] and [World Time] of the camera matches with time, date and
time zone in Windows PC or Mac computer. When both settings do not match severely,
please match them.
• Is the size of the image too large?
> Reduce the image size at [Size] (P160), and then send.
> Transmit after dividing the motion picture with [Video Divide] (P144).
• It may take longer time to transmit when distance to the wireless access point is far.
> Transmit closer to the wireless access point.
• Execute the [Reset Wi-Fi Settings] in the [Setup] menu. (P137)
However, all the information you have set on the [Wi-Fi Setup] menu will be reset.
When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and
password are not recognised, so I cannot connect to the PC.
The PC is not recognised when I use a Wi-Fi connection. The camera cannot be
connected to PC via Wi-Fi connection.
Transmission of the image fails midway. Some images cannot be transmitted.
I have forgotten the password for the Wi-Fi.
To Next Page
Loading...
Need help?
General
