2. Getting Started/Basic Operations
42
Assigning frequently used functions to the
buttons (function buttons)
You can assign recording functions, etc. to specific buttons.
1
Select the menu.
2
Press 3/4 to select the function button you
want to assign a function to and then press
[MENU/SET].
3
Press 3/4 to select the function you want to
assign and then press [MENU/SET].
• For details on the functions that can be assigned in [Setting in REC mode], refer to P43.
• For details on the functions that can be assigned in [Setting in PLAY mode], refer to
P43.
• To restore the default function button settings, select [Restore to Default].
> [Custom] > [Fn Button Set] > [Setting in REC mode]/[Setting
in PLAY mode]
• If you press and hold a function button (any of [Fn1] to [Fn2]) for 2 seconds, the screen
displayed in step
3 can be displayed. In some cases, however, the screen cannot be
displayed depending on the currently selected mode or the currently displayed screen.
MENU
To Next Page
Loading...
Need help?
General
