5. 4K Photo and Drive Settings
84
4
Press the shutter button fully to start
recording.
• The focus point changes automatically while recording.
When the icon (
B
) disappears, recording automatically
ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P85)
∫ Cancelling [Post Focus]
Select [OFF] in step
2. (P83)
∫ Limitations in [Post Focus]
• Since recording is performed in the same image quality as 4K photos, certain limitations apply
to recording functions and menu settings. For details, refer to “The camera’s setup for the 4K
Photo function” on P79.
• In addition to the limitations of the 4K Photo function, the following limitations apply to [Post
Focus] recording:
– Auto Focus Mode is disabled.
– Motion pictures cannot be recorded.
– [Digital Zoom] is disabled.
– [Remaining Disp.] is disabled.
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• The angle of view may become narrower during recording.
Not available in these cases:
• The [Post Focus] function is disabled when using the following settings:
– [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/
[Sunshine] (Creative Control Mode)
– [Clear in Backlight]/[Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Clear
Night Portrait]/[Soft Image of a Flower] (Scene Guide Mode)
– When using [Time Lapse Shot]
– When using a Wi-Fi connection
To Next Page
Loading...
