Recording
32
DVQX1072 (ENG)
Specifying the AF area position
• When [Focus Switching for Vert / Hor] in the [Custom] ([Focus / Release Shutter]) menu is set,
the last specified positions of the AF area (when [
Ø] or [ ] is set) and the MF Assist display
are stored separately for the camera’s horizontal and vertical orientations (two vertical
orientations, left and right, are available).
Applicable modes:
∫ When selecting [š], [ ], [Ø]
1 Press [ ].
2 Select [š], [ ] or [Ø] and press 4.
3 Change the position and size of the AF area.
4 Press [MENU/SET] to set.
• AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [ ] is touched.
([225-Area])
Up to 225 AF areas can be focused.
This is effective when a subject is not in the centre of the screen.
, etc.
([Custom Multi])
From among 225 AF areas, you can freely set the optimum shape of the
AF area for the subject.
([1-Area])
The camera focuses on the subject in the AF area on the screen.
([Pinpoint])
You can achieve a more precise focus on a point that is smaller than
[Ø].
If you press the shutter button halfway, the screen that lets you check
the focus will be enlarged.
Specifying the AF area position on the setting screen
Button
operation
Touch
operation
Description of operation
3/4/2/1 Touching Moves the position
//
Pinching out/in Changes the size
[DISP.] [Reset]
First time: The position is
reset to the centre
Second time: The size is
reset to the default
DC-GH5BodyGN-DVQX1072_eng.book 32 ページ ２０１７年２月１３日 月曜日 午前１１時４５分
To Next Page
Loading...
Need help?
General
