4. Focus, Brightness (Exposure) and Colour tone Settings
106
• In Manual Exposure Mode, you can compensate the exposure only when the ISO sensitivity is
set to [AUTO].
• You can set the exposure compensation value in the range between j5 EV and
i5 EV.
You can set a value between
j3 EV and i3 EV while recording motion picture or performing
recording with the 6K/4K Photo or Post Focus function.
• When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
flash will automatically be set to the level appropriate to the selected Exposure Compensation.
(P158)
• When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change.
It is recommended to record by checking the actual brightness of the recorded image in the
Auto Review or playback screen.
• The set Exposure Compensation value is stored even if the camera is turned off. (When
[Exposure Comp. Reset] (P224) is set to [OFF])
To Next Page
Loading...
Need help?
General
