71
3. Recording Modes
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform Programme Shift by rotating the rear dial or
front dial.
A Programme Shift indication
• To cancel Programme Shift, turn off this unit or rotate the
front/rear dial until the Programme Shift indication disappears.
Programme Shift can easily be cancelled by setting a function button to [One Push AE].
(P77)
Programme Shift
Not available in these cases:
• Programme Shift is not available in the following cases:
– When recording 6K/4K photos
– When recording with the Post Focus function
– When the ISO sensitivity is set to [ ]
2
00
0
60
4.0
98
98
SS
SS
F
250 125 60 30 15
4.02.8 5.6 8.0
To Next Page
Loading...
Need help?
General
