5. 6K/4K Photo and Drive Settings
114
∫ About the maximum number of pictures that can be taken continuously
When you press the shutter button halfway, the maximum number
of pictures you can take continuously will appear. You can check
the approximate number of pictures that can be taken before the
burst speed slows down.
Example: When 20 pictures can be taken: [r20]
• Once recording starts, the maximum number of pictures that can be taken continuously will
decrease. When [r0] appears, the burst speed will slow down.
• When [r99+] is displayed, you can take 100 or more pictures continuously.
Focusing in Burst Mode
The way focus is achieved varies according to the focus mode (P88) setting and the
[Focus/Release Priority] (P226) setting in the [Custom] ([Focus / Release Shutter]) menu.
¢1 When the subject is dark, the focus is fixed on the first picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Focus mode [Focus/Release Priority] Focus
[AFS]
[AFS/AFF]: [FOCUS]
At the first picture[AFS/AFF]: [BALANCE]
[AFS/AFF]: [RELEASE]
[AFF]
¢1
[AFS/AFF]: [FOCUS]
Burst speed is set to [H]: Predicted focusing
¢3
Burst speed is set to [M], [L]: Normal focusing
¢2
[AFS/AFF]: [BALANCE]
Predicted focusing
¢3
[AFS/AFF]: [RELEASE]
[AFC]
¢1
[AFC]: [FOCUS]
Burst speed is set to [H]: Predicted focusing
¢3
Burst speed is set to [M], [L]: Normal focusing
¢2
[AFC]: [BALANCE]
Predicted focusing
¢3
[AFC]: [RELEASE]
[MF] — Focus set with Manual Focus
To Next Page
Loading...
Need help?
General
