Recording
52
DVQX1067 (ENG)
Applicable modes:
• When using an interchangeable lens with O.I.S. switch (such as H-ES12060), stabiliser
function is activated if the O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of
purchase)
Select the menu. (P26)
1 Select the menu. (P26)
2 Enter a focal length.
2/1: Select the item (digit); 3/4: Setting
3 Press [MENU/SET].
> [Rec] > [Stabilizer]
[Operation
Mode]
[]
([Normal])
Camera shake is corrected for up/down, left/right, and
rotational movements.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures
which involves turning the camera to track the movements of a
subject which continues to move in a fixed direction).
[OFF]
[Stabilizer] does not work. ([ ])
• When using a lens with an O.I.S. switch, set the switch to
[OFF].
[E-Stabilization
(Video)]
Jitter during motion picture recording is corrected along the vertical,
horizontal, roll, pitch, and yaw axes by making use of the In-Lens Image
Stabiliser, In-Body Image Stabiliser, and Electronic Image Stabiliser. (5-Axis
Hybrid Image Stabiliser)
[ON]/[OFF]
• When [ON] is selected, the angle of view of recorded motion pictures may
become narrower.
[Focal Length
Set]
If the focal length is not set automatically, you can set it manually. (P52)
• When a manually selected focal length is set, a confirmation screen asking
you to change the focal length setting is displayed after you turn on the
camera.
Setting the focal length of a lens
> [Rec] > [Stabilizer] > [Focal Length Set]
DC-GH5LABodyGA-DVQX1067_eng.book 52 ページ ２０１７年２月１３日 月曜日 午前１１時３４分
To Next Page
Loading...
