77
3. Recording Modes
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
1 Set a function button to [One Push AE]. (P60)
2 (When exposure is not adequate)
Press function button.
• The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P76)
– When using a lens that includes an aperture ring
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
• If the aperture values and shutter speed blink red when the shutter button is pressed
halfway.
• If the Manual Exposure Assistance (P74) is anything other than when in Manual
Exposure mode.
Blink red
The exposure is changed to give a
suitable exposure.
00
-
3
-
3
2
00
8000800080003.53.53.5
989898
98
98
2
00
0
602.8
SS
SS
F
15 30 60 125 250
2.8 4.0 5.6
To Next Page
Loading...
Need help?
General
