85
3. Recording Modes
You can easily call up the settings you have registered using [Cust.Set Mem.].
Set the mode dial to [ ], [ ] or [ ].
• The corresponding custom set will be called up. If you set the mode dial to [ ], the last used
custom set will be called up.
∫ To change a custom set in [ ] ([Custom Mode] menu)
1 Set the mode dial to [ ].
2 Select the menu. (P55)
3 Press 3/4 to select the custom setting you want to use, and then press [MENU/
SET].
• Saving of the selected custom settings is displayed on the screen.
∫ Changing the registered content
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to , or . To change the registered settings, overwrite the
registered content using [Cust.Set Mem.] on the [Setup] menu.
Recording using registered custom set
> [Custom Mode]
It is also possible to display the selection screen by touching the
Recording Mode icon in recording screen.
MENU
To Next Page
Loading...
Need help?
General
