91
Wi-Fi/Bluetooth
(ENG) DVQX1067
∫ Connecting to the paired smartphone (connecting for the second and subsequent
times)
Select the menu. (P26)
1 Start “Image App”.
• If a message is displayed indicating that the smartphone is searching for cameras, close
the message.
2 Select [Bluetooth].
3 Turn on the Bluetooth.
4 Select the camera (device name) you want to connect to from the [Camera
registered] list.
∫ Terminating the Bluetooth connection to the smartphone and disabling the
Bluetooth function
Select the camera’s menu. (P26)
Connect to a smartphone via Wi-Fi.
• You can also connect via Wi-Fi to a smartphone that supports Bluetooth low energy by
following the same steps.
You can easily set up a direct connection to your smartphone without entering a password.
Select the menu. (P26)
A SSID
• When the camera is ready to be connected to the smartphone,
the SSID is displayed.
• You can also display the information by pressing [Wi-Fi] on the
camera.
On the camera
> [Setup] > [Bluetooth] > [Bluetooth] > [ON]
On your smartphone
If you set [Bluetooth] to [ON] on the camera in advance, you can make a connection just
by operating the smartphone.
> [Setup] > [Bluetooth] > [Bluetooth] > [OFF]
Using a smartphone that does not support Bluetooth low energy
Connecting without using the password
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection] > [Remote Shooting & View]
MENU
MENU
MENU
DC-GH5LABodyGA-DVQX1067_eng.book 91 ページ ２０１７年２月１３日 月曜日 午前１１時３４分
To Next Page
Loading...
